Xprog V6.12 Chip Programmer XPROG-M ECU Programmer With USB Dongle
Xprog Software V6.12 Firmware V5.4
Operating system: WinXP/Win7/Win8
Error About Certifate Expired:
When buyer meet this problem ,it means your computer install other older version and didn't uninstall yet.and computer has old xprog software registry.red and didn't uninstall ,so it wil cause this problem .
Now you need buy ATMEGA 64 chip to reflash programmer and then next time must click 6.12registry and then run 6.12 software.
XPROG V6.12 using tips:
1.XPROG V6.12 dongle isn't compatible with older version Xprog
2. Please Close all anti-virus software in your computer
3. Disconnect internet before use V6.12 XPROG-M
4. Uninstall all the old version XPROG software before you install V6.12 software, because XPROG V6.12 hardware is not compatible with other version XPROG software.
5. Never try to UPDATE it
Install Steps Manual:
1.Click the file "installation.reg", get the file information to theregedit.
2.Install the file "AdbeRdr11000_zh_CN.exe", it is a must, otherwisethe Xprog software will not start.
3.Plug the Xprog main interface to the computer, install the USB driver.
4.Copy the folder "XPROG-BOX6.12" to the desktop, and open it, and runthe "xprogdesktop.exe", then software open.
XPROG V6.12 Authorizations:
AUTH-0001Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROMand flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows toread/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization(allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flashmemory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypasssecurity bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automaticallydetects MPC5xx, M95xxx device type, flash, external flash and configurationmemory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization(allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/writeinternal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows toread/write secured and non-secured internal flash and external serial EEPROM,view /change mileage, Chassis number (VIN), serial number and PIN code).
AUTH-0024-3 9S12XE SECURITY
AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13
AUTH-0027-1HC(S)908 update Authorized 2016/3/13
AUTH-0027-2HC(S)908 sercurity Authorized 2016/3/13
AUTH-0028-1Renesas V850 Authorized 2017/10/9
AUTH-0028-2Renesas SuperH Authorized 2017/10/9
AUTH-0028-3Renesas RL78 Authorized ---New!
AUTH-0028-4Renesas M32C Authorized ---New!
Supported List Part Display:
We Also Recommend
Iprog+Plus Full Adapters Programmer (IMMO + Mileage Correction + Airbag Reset)
Durable Iprog+Plus with Full Adapters with NANO 93CXX Socket, SOP8 Socket Clip, (IMMO + Mileage Correction + Airbag Reset)
EZP2019+ High Speed USB SPI Programmer Support 24 25 93 EEPROM Flash Bios Chips