[Automotive Oscilloscope Starter Kit] PicoScope 2204A Full Kit 2 channel 10MHz, 8-bit Oscilloscope

$738.00
Unit price per

Description

[Automotive Oscilloscope Starter Kit] PicoScope 2204A Full Kit 2 channel 10MHz, 8-bit Oscilloscope

Features:

2 channels
10 MHz bandwidth
With Probes
Up to 1 GS/s sampling rate
Arbitrary waveform generator
Advanced digital triggers
Persistence display modes
USB connected and powered
Mask limit testing
Serial bus decoding

Specifications:

PicoScope 2200A Series Specifications
Oscilloscope – Vertical
Model	PicoScope 2204A	PicoScope 2205A	PicoScope 2206A	PicoScope 2207A	PicoScope 2208A
Input channels	2
Bandwidth	10 MHz	25 MHz	50 MHz	100 MHz	200 MHz
Rise time (calculated)	35 ns	14 ns	7 ns	3.5 ns	1.75 ns
Input type	BNC
Vertical resolution	8 bits
Enhanced vertical resolution	Up to 12 bits
Input sensitivity	10 mV/div to 4 V/div (10 vertical divisions)
Input ranges	±50 mV, ±100 mV, ±200 mV, ±500 mV, ±1 V, ±2 V, ±5 V, ±10 V, ±20 V
Input coupling	Software selectable AC/DC
Input characteristics	BNC, 1 MΩ ∥ 14 pF		BNC, 1 MΩ ∥ 13 pF
DC accuracy	±3% of full scale
Analog offset range (vertical position adjust)	none		±250 mV (50 mV to 200 mV ranges) ±2.5 V (500 mV to 2 V ranges) ±20 V (5 V to 20 V ranges)
Overvoltage protection	±100 V (DC + AC peak)
Oscilloscope – Horizontal
Maximum sampling rate (real-time) 1 channel 2 channel	100 MS/s 50 MS/s	200 MS/s 100 MS/s	500 MS/s 250 MS/s	1 GS/s 500 MS/s	1 GS/s 500 MS/s
Maximum sampling rate (repetitive signals, ETS mode)	2 GS/s	4 GS/s	5 GS/s	10 GS/s	10 GS/s
Maximum sampling rate (continuous streaming mode)	1 MS/s		9.6 MS/s
Maximum waveforms per second	2200	3300	5700	6300	8500
Timebase ranges	10 ns to 5000 s/div	5 ns to 5000 s/div	2 ns to 5000 s/div	1 ns to 5000 s/div	500 ps to 5000 s/div
Buffer memory#	8 kS	16 kS	32 kS	40 kS	48 kS
Buffer memory (streaming mode)	2 MS per channel in PicoScope software.		100 MS (shared) in PicoScope software.
Waveform buffer normal triggering rapid block triggering	Up to 10,000 waveforms not applicable		Up to 10,000 waveforms Up to 32 waveforms
Timebase accuracy	±100 ppm		±50 ppm
Sample jitter	< 30 ps RMS		< 5 ps RMS
Spectrum analyzer
Frequency range	DC to 10 MHz	DC to 25 MHz	DC to 50 MHz	DC to 100 MHz	DC to 200 MHz
Display modes	Magnitude, peak hold, average
Window types	Rectangular, Gaussian, triangular, Blackman, Blackman–Harris, Hamming, Hann, flat–top
Number of FFT points	Selectable from 128 to half the available buffer memory in powers of 2
Scale / units	X axis : linear or log 10 Y axis : logarithmic (dbV, dBu, dBm, arbitrary) or linear (volts)

* Buffer memory is shared between active channels.

Dynamic performance (typical)
Crosstalk (full bandwidth)	Better than 200:1 (equal ranges)	Better than 400:1 (equal ranges)
Harmonic distortion	< -50 dB at 100 kHz, full–scale input
SFDR	> 52 dB at 100 kHz, full–scale input
Noise	< 150 μV RMS (±50 mV range)	< 200 μV RMS (±50 mV range)
Bandwidth flatness (at scope input)	(+0.3 dB, -3 dB) from DC to full bandwidth
Triggering
Sources	Ch A, Ch B
Trigger modes	None, auto, repeat, single	None, auto, repeat, single, rapid (segmented memory)
Advanced triggers	Edge, window, pulse width, window pulse width, dropout, window dropout, interval, logic.
Trigger types, ETS	Rising or falling edge
Trigger level	Adjustable over whole of selected voltage range
Trigger sensitivity	Digital triggering provides 1 LSB accuracy up to full bandwidth. In ETS mode, typical 10 mV p-p at full bandwidth
Maximum pre-trigger capture	100% of capture size
Maximum post-trigger delay	4 billion samples
Trigger rearm time	PC-dependent	< 2 µs on fastest timebase
Maximum trigger rate	PC-dependent	Up to 32 waveforms in a 64 μs burst
Function generator
Standard output signals	Sine, square, triangle, DC voltage, ramp, sinc, Gaussian, half-sine
Pseudorandom output signals	None	White noise, PRBS
Standard signal frequency	DC to 100 kHz	DC to 1 MHz
Sweep modes	Up, down, dual with selectable start/stop frequencies and increments
Output frequency accuracy	±100 ppm	±50 ppm
Output frequency resolution	< 0.01 Hz
Output voltage range	±2 V
Output adjustments	Any amplitude and offset within ±2 V range
Amplitude flatness (typical)	< 1 dB to 100 kHz	< 0.5 dB to 1 MHz
DC accuracy	±1% of full scale
SFDR	> 55 dB @ 1 kHz full–scale sine wave	> 60 dB @ 10 kHz full–scale sine wave
Connector type	Front panel BNC with 600 Ω output impedance
Overvoltage protection	±10 V
Arbitrary waveform generator
Update rate	2 MS/s	20 MS/s
Buffer size	4 kS	8 kS
Resolution	12 bits
Bandwidth	>100 kHz	>1 MHz
Rise time (10% to 90%)	< 2 µs	< 120 ns

Math channels
Functions	−x, x+y, x−y, x*y, x/y, x^y, sqrt, exp, ln, log, abs, norm, sign, sin, cos, tan, arcsin, arccos, arctan, sinh, cosh, tanh, freq, derivative, integral, min, max, average, peak, delay
Operands	A, B (input channels), T (time), reference waveforms, constants, Pi
Automatic measurements
Oscilloscope mode	AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak to peak, rise time, rising rate.
Spectrum mode	Frequency at peak, amplitude at peak, average amplitude at peak, total power, THD %, THD dB, THD plus noise, SFDR, SINAD, SNR, IMD
Statistics	Minimum, maximum, average and standard deviation
Serial decoding
Protocols	CAN, LIN, I²C, UART/RS-232, SPI, I²S, FlexRay
Inputs	All input channels with any mixture of protocols
Mask limit testing
Mask generation	Auto generate from captured waveform, manual drawing, manual coordinate entry
Actions	Highlight on screen, select in buffer overview, activate alarm
Statistics	Pass/fail, failure count, total count
Alarms
Initiating events	Capture, buffer full, mask fail
Alarm actions	Beep, play sound, stop/restart capture, run executable, save current buffer/all buffers, trigger signal generator
Display
Interpolation	Linear or sin(x)/x
Persistence modes	Digital color, analog intensity, fast, custom
Data export
Output file formats	BMP, CSV, GIF, JPG, MATLAB 4, PDF, PNG, PicoScope data, PicoScope settings, TXT
Output functions	Copy to clipboard, print
Environmental
Temperature range (operating)	0 °C to 50 °C
Temperature range (stated accuracy)	20 °C to 30 °C
Temperature range (storage)	–20 °C to +60 °C
Humidity range (operating)	5% to 80% RH non-condensing
Humidity range (storage)	5% to 95% RH non-condensing
Physical properties
Dimensions (including connectors)	142 x 92 x 19 mm
Weight	< 0.2 kg (7 oz)
Software
Software included	PicoScope 6 for Windows oscilloscope software (all models) PicoLog for Windows data logging software (PicoScope 2204A and 2205A only)
Optional free software	PicoScope 6 Beta for Linux and OS X. Drivers for Linux and OS X.
Languages	Chinese (simplified), Chinese (traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Spanish, Swedish, Turkish
General
Additional hardware supplied	Quick start guide, software CD–ROM
PC requirements	Microsoft Windows XP (SP3), Vista, Windows 7 or Windows 8 (not Windows RT).
PC connectivity	USB 2.0 port (compatible with USB 1.1 and USB 3.0; USB 1.1 not recommended)
Power requirements	Powered from USB port
Safety approvals	Designed to EN 61010-1:2010
Compliance	RoHS, WEEE, and LVD compliant. Tested to meet EN61326-1:2006 and FCC Part 15 Subpart B.
Total satisfaction guarantee	In the event that this product does not fully meet your requirements you can return it for an exchange or refund. To claim, the product must be returned in good condition within 14 days.
Warranty	1 year

Package List:

1x PicoScope 2204A Main Unit
2x Probe
1x USB Cable

1x Hantek CC65
1x Hantek CC650
2x Hantek PP80 Probe
2x Hantek HT311 BNC to Banana Adapter
2x Hantek HT201 20:1 Attenuator
2x Hantek HT25 Auto Ignition Probe
2x Hantek HT308 Coil Probe
5x Hantek HT307 Needle Back Test Probe
2x Hantek HT30A Scope Leads
4x Hantek HT18A Crocodile Clip